Choosing the Best Home Heating System Installation in Oklahoma City, OK

January 19, 2018 8:18 pm Published by Leave your thoughts

Heating system installation in Oklahoma City, OK is a significant investment. Like most homeowners, you want to ensure you choose the best option for your property, your needs and your budget. Because you have a plethora of options when it comes to heating systems, we’ve put together the following information to help you choose the right product for you. Use this guide as you select your home’s heating system installation in Oklahoma City, OK.

Central Heat

Most homes in the United States now have a central furnace for heat. This works by pushing heated air through air ducts. This system of ducts stretches throughout the home to deliver heated air to all rooms through vents in the floors, ceilings or walls. This system of heat delivery is called a ducted warm-air or forced warm-air system. Central heating can be powered by fuel oil, natural gas or electricity.

One quality to look for if you are choosing central heat for your heating system installation in Oklahoma City, OK is the Annual Fuel Utilization Efficiency (AFUE) rating. This rating indicates the amount of useful heat the system produces per unit of fuel. This is also referred to as combustion energy. You can think of it as the miles per gallon rating for your furnace—the higher the AFUE rating, the more efficient the furnace.


These systems operate quite differently from central air. Central air furnaces push heated air through the home, while boilers distribute heat through hot water. The boiler is essentially a specialized water heater. It sends hot water to radiators or other devices in rooms throughout the house, where the water gives off heat. Once cooled, the water returns to the boiler, where it is reheated. This type of heat is also referred to as a hydronic system. They are typically powered by natural gas or heating oil.

While boilers are less common than central heat, they do offer a couple of advantages. Plastic tubing can be installed in the floor to create radiant floor heating. It’s also easier to create “zone” thermostats to control the temperature of individual rooms.

Heat Pumps

Heat pumps deliver heated air through forced-air delivery systems. However, they work differently than central heating. These act as two-way air conditioners, moving heat from indoors to the outside during summer and bringing in heat from the outdoors during winter. Heat pumps use an electrical system to generate heat from outdoor air and discharge it into the house.

Heat pumps typically come in one of two formats. Air-source heat pumps use outside air for their heat source, while ground-source heat pumps obtain heat from underground. Ground-source systems are more efficient; however, air-source systems are cheaper and easier to install.

Choose Wisely

Which type of heating system installation in Oklahoma City, OK is right for you? If you’re not sure which of these systems is best for your property and needs, contact the heating professionals at Dailey Heating & Air Conditioning. Our expert team is available to answer any questions you have and help you choose the ideal heating solution for your setting.

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *